This geostationary land surface temperature (LST) collection was retrieved using Himawari/AHI observations and calibrated against MODerate-resolution Imaging Spectroradiometer (MODIS) best-quality retrievals for Australia. It was developed under an academic collaboration between the Australian National University (ANU) and the Commonwealth Scientific and Industrial Research Organisation (CSIRO). It has a spatial resolution of 2 km and temporal frequency of 10 min, and has been periodically updated since its inception in July 2015. This record has a temporal length of 8.5 years (i.e., Jul 2015 - Dec 2023) and the subsequent updates will be published annually.

This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in open forest savanna using eddy covariance techniques.<br /><br /> The site is classified as open forest savanna. The overstory is co-dominated by tree species <em>E. tetrodonta</em>, <em>E. dichromophloia</em>, <em>C. terminalis</em>, <em>Sorghum intrans</em>, <em>S. plumosum</em>, <em>Themeda triandra</em> and <em>Chrysopogon fallax</em>, with canopy height averaging 12.3m. Elevation of the site is close to 175m and mean annual precipitation from a nearby Bureau of Meteorology site measures 895.3mm. Maximum temperatures range from 29.1°C (in June) to 37.6°C (in July), while minimum temperatures range from 14.6°C (in July) to 24.8°C (in November). Maximum temperatures vary seasonally by 8.5°C and minimum by 10.2°C. <br /><br /> The instrument mast is 15 meters tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation are measured above the canopy. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry. <br /> Ancillary measurements taken at the site include LAI, leaf-scale physiological properties (gas exchange, leaf isotope ratios, N and chlorophyll concentrations), vegetation optical properties and soil physical properties. Airborne based remote sensing (Lidar and hyperspectral measurements) was carried out across the transect in September 2008. <br /><br />This data is also available at http://data.ozflux.org.au .

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.5.0) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The site is classified as box woodland, dominated by two main eucalypt species: <em>Eucalyptus microcarpa</em> (grey box) and <em>Eucalyptus leucoxylon</em> (yellow gum). The site has an elevation of 165&nbsp;m. Mean annual precipitation measured by the nearby Bureau of Meteorology site is 558&nbsp;mm. Maximum temperatures range from 12.6&nbsp;°C (in July) to 29.8&nbsp;°C (in January), while minimum temperatures range from 3.2&nbsp;°C (in July) to 14.2&nbsp;°C (in February). Maximum temperatures vary on a seasonal basis by approximately 17.2&nbsp;°C and minimum temperatures by 11.0&nbsp;°C.</br> <br>The instrument mast is 36&nbsp;m tall. Heat, water vapour and carbon dioxide measurements are taken using the open-path eddy flux technique. Temperature, humidity, wind speed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation are measured above the canopy. Soil heat fluxes are measured and soil moisture content is gathered using time domain reflectometry.</br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.5.0) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>Alice Springs Mulga flux station is located on Pine Hill cattle station, near Alice Springs in the Northern Territory. The woodland is characterized by the <i>Acacia aneura</i> canopy, which is 6.5&nbsp;m tall on average. Elevation of the site is 606&nbsp;m above sea level, and the terrain is flat. Mean annual precipitation at the nearby (45&nbsp;km distant) Bureau of Meteorology station is 305.9&nbsp;mm but ranges between 100&nbsp;mm in 2009 to 750&nbsp;mm in 2010. Predominant wind directions are from the southeast and east. The extent of the woodland is 11&nbsp;km to the east of the flux station and 16&nbsp;km to the south. The soil is red sandy clay (50:50 sand:clay) overlying a 49&nbsp;m deep water table. Pine Hill Station is a functioning cattle station that has been in operation for longer than 50 years. The instrument mast is 13.7&nbsp;m tall. Fluxes of heat, water vapour and carbon are measured using the open-path eddy covariance technique at 11.6&nbsp;m. Supplementary measurements above the canopy include temperature and humidity (11.6&nbsp;m), windspeed and wind direction (9.25&nbsp;m), downwelling and upwelling shortwave and longwave radiation (12.2&nbsp;m). Precipitation is monitored in a canopy gap (2.5&nbsp;m). Supplementary measurements within and below the canopy include barometric pressure (1&nbsp;m), wind speed (2&nbsp;m, 4.25&nbsp;m and 6.5&nbsp;m), and temperature and humidity (2&nbsp;m, 4.25&nbsp;m and 6&nbsp;m). Below ground soil measurements are made in bare soil, mulga, and understory habitats and include ground heat flux (0.08&nbsp;m), soil temperature (0.02&nbsp;m – 0.06&nbsp;m) and soil moisture (0 – 0.1&nbsp;m, 0.1 – 0.3&nbsp;m, 0.6 – 0.8&nbsp;m and 1.0 – 1.2&nbsp;m). Ancillary measurements include soil water and carbon fluxes, leaf water potential, leaf gas exchange, stem basal area, stem growth, litter production, leaf area index, stem hydraulic conductance, and carbon and water stable isotope ratios. <br />

This data release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer in semi-arid eucalypt woodland using eddy covariance techniques. It been processed using PyFluxPro (v3.3.3) as described in Isaac et al. (2017), <a href="https://doi.org/10.5194/bg-14-2903-2017">https://doi.org/10.5194/bg-14-2903-2017</a>. PyFluxPro takes data recorded at the flux tower and process this data to a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER). For more information about the processing levels, see <a href="https://github.com/OzFlux/PyFluxPro/wiki">https://github.com/OzFlux/PyFluxPro/wiki</a>. <br /> <br /> The Calperum Chowilla site was established in July 2010 and is managed by the University of Adelaide (UA), coordinated by Prof Wayne Meyer and Prof David Chittleborough of the Landscape Futures Program as part of the Environment Institute. This is a former sheep grazing property that has been destocked and is being managed as a conservation area in this type of ecosystem. The landscape is flat with a series of low east–west sand dunes. The dunes are remnants of a previous dry era and are mostly now stabilised by mallee (multi-stemmed Eucalypt trees) and various shrubs. It is a semi-arid environment fringing the River Murray floodplains of the Riverland.<br />For additional site information, see http://www.landscapescience.org/. <br /><br />

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>The Cape Tribulation flux station was located in the land that is adjacent to the Daintree National Park which is part of the Wet Tropics World Heritage Area (WTWHA). The site is flanked to the west by coastal ranges rising to more than 1400&nbsp;m and to the east by the Coral Sea. The red clay loam podzolic soils are of metamorphic origin and have good drainage characteristics. The metamorphic rocks grade into granite boulders along Thompson Creek which runs along the northern boundary of the site. The crane site itself is gently sloping but the fetch area makes the site one of very complex terrain. The forest is classed as complex mesophyll vine forest (type 1a) and has an average canopy height of 25m. The dominant canopy trees belong to the <i>Apocynaceae</i>, <i>Arecaceae</i>, <i>Euphorbiaceae</i>, <i>Lauraceae</i>, <i>Meliaceae</i>, <i>Myristicaceae</i> and <i>Myrtaceae</i> families. The forest is continuous for several kilometres around the crane except for an area 300&nbsp;m due east of the crane, which is regrowth forest. Annual average rainfall at the site is around 5180&nbsp;mm and is strongly seasonal, with 66% falling between January and April (wet season). Mean daily temperature ranges from 26.6&nbsp;°C in February to 21.2&nbsp;°C in July. </br> <br> Tropical cyclones are a frequent occurrence in Far North Queensland. These severe tropical storm systems are natural phenomena which play a major role in determining the ecology of Queensland's tropical lowland rainforests. In March 1999 Tropical Cyclone Rona (Category 3) passed over the Cape Tribulation area causing widespread damage (gusts >170&nbsp;km/h). At the site several large trees fell, nearly all of the remaining trees were stripped of leaves and the lianas towers were torn to ground level. </br> <br> The flux station was mounted at the 45&nbsp;m level on the tower of the Australian Canopy Crane external link. The canopy crane is a Liebherr 91 EC, freestanding construction tower crane. The crane is 48.5&nbsp;m tall with a radius of 55&nbsp;m enabling access to 1 hectare of rainforest. Fluxes of heat, water vapour and carbon dioxide were measured using the open-path eddy covariance technique. Supplementary measurements above the canopy included temperature, humidity, rainfall, total solar; these measurements have continued post the flux system decommissioning. Heat flux, soil temperature and water content (time domain reflectometry) were measured in proximity to the flux station; these measurements have continued post the flux system decommissioning. Detailed biometric measurements are made at the crane site and all trees have regular (5 yearly) dbh measurements and canopy mapping carried out. Monitoring bores (3) are located on site. Leaf litter measurements are carried out on a monthly basis.

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> The Gatum Pasture flux station, established in February 2015, was located on private farmland in southwestern Victoria, approximately 300&nbsp;km west of Melbourne. The pasture is composed of winter-active perennial grasses (<em>Phalaris aquatica</em> L. and <em>Trifolium subteraneum</em> L.) and is used for sheep and, sporadically, cattle grazing.</br>

This dataset consists of measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer from an Almond Orchard in South Australia's Riverland, using eddy covariance techniques. <br /> <br /> The Loxton site was established in August 2008 and decommissioned in June 2009. The orchard was divided into 10 ha blocks (200 m by 500 m with the long axis aligned north–south) and the flux tower was situated at 34.47035°S and 140.65512°E near the middle of the northern half of a block of trees. The topography of the site was slightly undulating and the area around the tower had a slope of less than 1.5°. The orchard was planted in 2000 with an inter-row spacing of 7 m and a within row spacing of 5 m. Tree height in August 2008 was 5.5 m. The study block consists of producers, Nonpareil, planted every other row, and pollinators planted as alternating rows of Carmel, Carmel and Peerless, and Carmel and Price. All varieties were planted on Nemaguard rootstock. All but 31 ha of the surrounding orchard was planted between 1999 and 2002. Nutrients were applied via fertigation. Dosing occurred between September and November and in April with KNO3, Urea, KCl, and NH4NO3 applied at annual rates of 551, 484, 647, and 113 kg/ha, respectively. The growth of ground cover along the tree line was suppressed with herbicides throughout the year. Growth in the mid-row began in late winter and persisted until herbicide application in late November. <br> The research was supported with funds from the National Action Plan for Salinity via the Centre for Natural Resource Management, and the River Murray Levy.<br />This data is also available at http://data.ozflux.org.au . <br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.15) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br> <br>Robson Creek site is part of the Far North Queensland (FNQ) Rainforest Site along with affiliated monitoring sites at Cape Tribulation (Daintree Rainforest Observatory) and Cow Bay (Daintree Discovery Centre). The flux station is located at the foothills of the Lamb Range, part of the Wet Tropics World Heritage Area, and north-west of a 25&nbsp;ha census plot established by CSIRO in 2012.</br> <br>The forest is classified as Regional Ecosystem (RE) 7.3.36a, complex mesophyll vine forest (Queensland Government, 2006). There are 211 species in the adjacent 25&nbsp;ha plot, and average tree height is 28&nbsp;m, ranging from 23 to 44&nbsp;m. Elevation of the site is 711&nbsp;m and mean annual precipitation is 2000&nbsp;mm. The upland rainforests of the Atherton Tablelands are some of the most biodiverse and carbon dense forests in Australia. The landform of the 25&nbsp;ha plot which is in the dominant wind direction from the station is moderately inclined with a low relief, a 30&nbsp;m high ridge running north/south through the middle of the plot and a 40&nbsp;m high ridge running north/south on the eastern edge of the plot.</br> <br>The instruments are mounted on a free standing station at 40&nbsp;m. Fluxes of heat, water vapour and carbon dioxide are measured using the open-path eddy flux technique. Supplementary measurements above the canopy include temperature, humidity, windspeed, wind direction, rainfall, incoming and reflected shortwave radiation and net radiation.</br> <br>Note: Level 3 data for 2015 - 2018 were updated in 2018 correcting a rainfall issue in 2015 and a wind direction issue 2016 - 2018. A data gap from 2019-02-14 to 2019-02-21 was due to a major power supply failure.</br>

<br>This release consists of flux tower measurements of the exchange of energy and mass between the surface and the atmospheric boundary-layer using eddy covariance techniques. Data were processed using PyFluxPro (v3.4.17) as described by Isaac et al. (2017). PyFluxPro produces a final, gap-filled product with Net Ecosystem Exchange (NEE) partitioned into Gross Primary Productivity (GPP) and Ecosystem Respiration (ER).</br><br> Fletcherview Tropical Rangeland SuperSite was established in 2021 at James Cook University’s Fletcherview Research Station, a fully operational outback cattle station located 50&nbsp;km west of Townsville, Queensland. The site is used for cattle grazing and is characterised by tall open savanna. The vegetation is dominated by native grasses such as blackspear and kangaroo grasses, as well as introduced species like buffel grass, signal grass and leucaena. Fletcherview typically experiences a dry and wet season, with most rainfall occurring between January and April.<br />